Overview
This is an E-Ink display HAT for Raspberry Pi, 7.8inch, 1872×1404 resolution, with embedded controller IT8951, communicating via USB/SPI/I80 interface, supports partial refresh.
Due to the advantages like low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as ebook reader, e-ink display, industrial instruments, and so on.
Features
No backlight, keeps displaying last content for a long time even when power down
Low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
USB/SPI/I80 interface, for connecting with host boards like Raspberry Pi/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/STM32)
Specifications
Operating voltage: 5V
Interface: USB/SPI/I80
Outline dimension: 173.8mm × 127.6mm × 0.78mm
Display size: 158.184mm × 118.638mm
Dot pitch: 0.0845mm × 0.0845mm
Resolution: 1872 × 1404
Display color: black, white
Gray scale: 2-16 (1-4 bit)
Full refresh time: 450ms
Total refresh power: 1.2W(typ.)
Total standby power: 0.1W(typ.)
Viewing angle: >170°
Wiki : www.waveshare.com/wiki/7.8inch_e-Paper_HAT?amazon
PACKAGE CONTENT
7.8inch e-Paper x1
e-Paper IT8951 Driver HAT (B) x1
7.8inch e-Paper Adapter x1
33PIN FFC (same side contact) x1
RPi screws pack (2pcs) x1
PH2.0 20cm 8Pin x1
USB type A plug to micro B plug cable x1
Note:7.8inch e-Paper is big size screen, the glass panel and FPC is fragile, please be careful when use it for developing. we recommend you to reinforce the FPC with scotch tape when developing. Please connect all the cables before powering the device, the device cannot support hot-plug.
This is an E-Ink display HAT for Raspberry Pi, 7.8inch, 1872×1404 resolution, with embedded controller IT8951, communicating via USB/SPI/I80 interface, supports partial refresh.Due to the advantages like low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as ebook reader, e-ink display, industrial instruments, and so on.
No backlight, keeps displaying last content for a long time even when power down. Low power consumption, basically power is only required for refreshing.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. USB/SPI/I80 interface, for connecting with host boards like Raspberry Pi/Nucleo, etc.
Outline dimension: 173.8mm × 127.6mm × 0.78mm. Display size: 158.184mm × 118.638mm. Dot pitch: 0.0845mm × 0.0845mm. Gray scale: 2-16 (1-4 bit). Full refresh time: 450ms. Más información:  | | Peso: | 249.00 g | Largo: | 39.90 cm | Ancho: | 18.40 cm | Altura: | 5.40 cm |
|