Placa de desarrollo WiFi Silicon Labs SLWSTK6007A, frecuencia 915MHZ

A Wi-SUN Wireless Starter Kit (WSTK) with 868-915 MHz Radio Boards (BRD4170A) is an excellent starting point to get familiar with the EFR32™ FG12 and MG12 Wireless System-on-Chip solutions. It provides all necessary tools for developing a Wi-SUN wireless applications. The Wireless Starter Kit Mainboard contains an on-board J-Link debugger with a Packet Trace Interface and a virtual COM port, enabling application development and debugging of the attached radio board as well as external hardware. The mainboard also contains sensors and peripherals for easy demonstration of some of the EFR32s many capabilities.BRD4170A is a plug-in board for the Wireless Starter Kit Mainboard. It is a complete reference design for the EFR32MG12 Wireless SoC, with 19 dBm output power, a PCB antenna for the 2.4 GHz band, and an SMA connector and a wide-band matching network for operation in either the 868 MHz or the 915 MHz band.Key FeaturesAdvanced Energy Monitor Packet Trace Interface Virtual COM Port SEGGER J-Link on-board debugger External device debugging Ethernet and USB connectivity Silicon Labs Si7021 Relative Humidity and Temperature sensor Low Power 128x128 pixel Memory LCD User LEDs / Pushbuttons 20-pin 2.54 mm EXP header Breakout pads for Wireless SoC I/O CR2032 coin cell battery support EFR32MG12 Mighty Gecko Wireless SoC with 1024 kB Flash, and 256 kB RAM (EFR32MG12P433F1024GM68) Dual band integrated radio transceiver 19 dBm output power Inverted-F PCB antenna (2.4 GHz) SMA antenna connector (868-915 MHz)Kit Contents3 x Wireless starter kit mainboard 3 x 2.4 GHz/915MHz 19 dBm radio boards AA Battery Board (supports running +19 from battery) Cables